Tag Archive for: Crops

By Darron Gaus, NCAT Agriculture Specialist 

A Taste of July 

When I was farming in San Antonio, Texas, one of my favorite crops to grow was watermelon. I would often stop during harvest to sit on the sun-warmed soil, cut open a 10-pound source of potassium-rich hydration, and chat with the crew while juice flowed down our chins. I even carried a shaker of pink Himalayan sea salt in my back pocket, ready for the quick draw when that moment came. (And if you’ve never salted your watermelon, give it a try. Just trust me on this.) Those were special moments that helped us all endure the arduous work of farming. 

Over the course of nearly 20 seasons, I grew watermelons in almost every way imaginable and learned a lot about this unique cucurbit. I often pondered if the “water” in “watermelon” comes from the contents or its water-seeking abilities. Watermelon can congregate its fibrous root system to function like a central tap root. It does this in sandy soils with astounding efficiency, even potentially reaching down into the water table itself. I grew watermelons in modeling clay, the blackest of gumbos. After the first few seasons, I learned that I needed to play to the watermelon’s strengths. If I wanted the soil’s water to convert into hydration to enjoy during my future break times, I had to adapt my growing methods. 

Learning from Failure and Abundance 

I began conventionally, using industry-standard methods for growing watermelon at scale. My crew and I chisel plowed once a year and disk harrowed three times in every direction. Then we prepped the beds in one pass with the fine, almost desiccated clay shaped by a metal pan, covered with plastic mulch, and bisected by a single line of drip irrigation in the middle of each. After all that, I had to pump the water back in that I just helped evaporate into thin air. Three hundred thousand gallons of water for the five acres of soon-to-be-planted watermelons poured through pipes, hoses, and drip tape to ensure transplants or seeds had available moisture as soon as they dropped into their new home for the next 80 to 100 days.  

Time-sensitive cultivation with 12-inch listers (arrow-shaped metal sweeps designed to move soil to either side of a center furrow) and hand-weeding the holes was the only thing left to do before harvest. Plant density was high in this system, and the yield was great, but keeping up with water demands in the high shrink-swell clay was a constant failure. The hardpan that formed from so many equipment passes was impenetrable, even for the well-adapted watermelon roots. 

Farmworkers bringing in the watermelon harvest. Photo: USDA, Preston Keres.

After two seasons of conventional methods, I began implementing conservation practices that would increase organic matter, conserve soil moisture, and reduce my time on the tractor. Increasing organic matter in the heavy clay I farmed greatly increased porosity, water retention, living biology in the soil, and nutrient cycling. Cover crops, with a mix of at least three species, became my new obsession. Three quarters of the 105 acres were under cover crops designed for specific benefits: high biomass for weed suppression and organic matter, a brassica for insect trapping and greater soil porosity, and a legume for nitrogen fixation.  

The cover crops provided one more critical benefit: they captured every rain drop that fell. I no longer had rill erosion in my furrows after a two-inch-per-hour rainfall. The large rills that once forced me to waste time sweeping beds back up were gone. Soil aggregation and tilth improved. Organic matter increased and the high pH came down. Watermelons grew like they were supposed to.  

The first season of adopting this new farming approach came with its share of challenges. We had to develop innovative cultivation techniques to manage weed pressure and adjust our bed preparation methods to work with a high-residue topsoil layer. These adjustments initially led to a 20% drop in yields. However, after a season of learning and refining our practices, the results were remarkable—yields rebounded to impressive levels, all while requiring significantly less irrigation. 

Pushing the Envelope

Watermelon interplanted with Sudan grass. Photo by Darron Gaus.

Once I started seeing the changes that the conservation practices were making, I wanted to add more. I wanted to try new things, so I pushed the envelope. I wanted those juice-covered-chin breaks in harvesting watermelon in November, not just July. The only thing standing in the way was overcoming the water demand of an August planting. August in San Antonio is usually 31 days of triple-digit temperatures and no rain in the forecast. Sudan grass grows tall quickly in these conditions, so I interplanted it with the watermelon. The idea was that the Sudan grass would provide wind breaks and shade to the seedlings, helping to conserve soil moisture. And it worked! We harvested watermelon in November that year, but it came with consequences. The harvest took place in nine-foot-tall grass-walled tunnels, which made passing the watermelons to the edges of the field for easy pick-up impossible. Every single watermelon (all undersized because of lack of sunlight during fruiting) had to be individually walked out of the field. Luckily, we had 200 volunteers from the Air Force on the day of harvest, and in spite of the tall grass, they still managed to pack out 12,000 pounds of three-to-five-pound fruits in just under two hours. That November was the only fall harvest of watermelon in my career; the price of labor was too steep. I pushed it too far, but I learned. 

Water Rising to the Surface 

Watermelons taught me many lessons, but none as important as water conservation. What began as a simple pursuit of sweetness transformed into a lesson about the lifeline that sustains these plants: water. Each watermelon I grew represented the delicate balance between abundance and scarcity. I learned how much water it takes to nurture just one fruit, and how easily that resource can be taken for granted.  

Within the vibrant green rind and the refreshing red flesh is a story of soil, sun, and most critically, sustainability. In tending to the vines, I began to see the bigger picture. I saw how water connects everything: the land, the food we eat, and the future we hope to build. What started as farming became a quiet education in stewardship.  

Watermelons, in their quiet way, reminded me that what’s beneath the surface often matters most—our water, our world, our shared responsibility.  

Come back for Part Two of the sweetest story ever told. It involves compost, city citations, crowded cover crops, and conservation dryland farming. 

By Andy Pressman, NCAT Sustainable Agriculture Program Director

“Homegrown tomatoes, homegrown tomatoes,
What’d life be without homegrown tomatoes?
Only two things that money can’t buy
And that’s true love and homegrown tomatoes.”

– Guy Clark, Homegrown Tomatoes

Listen to a clip of “Homegrown Tomatoes” by Guy Clark

The author’s daughter enjoying a homegrown tomato.

It sure is hard to imagine life without homegrown tomatoes. For some, like American folk singer Guy Clark, it is well worth the wait over the winter months for a sun-ripened tomato fresh off the vine, and for the experience of first biting into one and feeling that rush of flavor as it explodes in your mouth. This moment of joy is not limited to gardeners—anyone can seek out these precious, homegrown flavors from farmers who grow tomatoes skillfully and with great care.

Tomatoes are a staple summer crop for many diversified farms: high-value, in-demand, and, when conditions are right, highly productive. But as summers grow hotter and more unpredictable, even this dependable crop can show signs of stress. Blossom drop, sunscald, delayed or uneven ripening, and declines in yield are symptoms caused by intense heat.

Whether you’re selling at farmers markets, through CSA shares, or to wholesale accounts, heat stress in tomato production can quickly translate into lost income. With the right strategies, you can mitigate heat-related issues and maintain healthy, productive plants, even at the height of summer. Read on for common heat-related issues and how to solve them.

Fruit Set and Blossom Drop

Heat can impede fruit set when daytime highs are consistently over 90°F and nighttime temperatures stay above 70°F. Blossoms can drop and pollen can become less viable as the plant shifts from reproductive to survival mode. Choosing heat-tolerant varieties and staggering plantings to avoid peak summer stress, including planting early in high tunnels, can reduce blossom drop. Using hoops and shade cloth in the field can reduce the sun’s intensity. Managing soil temperature and moisture by utilizing practices such as drip irrigation and mulching can also help retain flowers.

Close-up of a tomato blossom. Photo credit: Nina Prater.

Pollination

Fruit deformities can result from a lack of pollination. Planting pollinator habitats in and around tomato plantings can increase pollination from native pollinators. It’s also a good idea to limit insecticide use (even organic-approved insecticides) during bloom periods. Hand-pollinating plants can improve pollination rates, especially in high tunnels. Applying a kelp or seaweed fertilizer as a foliar spray during early flowering also helps mitigate heat-related stress that impacts pollination and causes misshapen fruits.

Sunscald

Sunscald on tomatoes occurs when the fruit is exposed to intense sun, especially after the plants are pruned and leaf cover is reduced. Sunscald causes the fruit to develop leathery white or gray patches on the skin that make it unmarketable. Maintaining leaf canopy during periods of extreme heat by limiting pruning and sucker removal can reduce sunscald. Trellising can assist in providing more leaf canopy, while also assisting with airflow. And, as with blossom drop, utilizing shade techniques in high tunnels or in the field can reduce the risk of sunscald during periods of intense heat.

Ripening Issues and Yellow Shouldering

Extended periods of high temperatures can cause uneven or delayed ripening, and can also cause the fruit to exhibit green or yellow tops, known as yellow shouldering. Managing potassium availability in the soil can help prevent these issues. Use soil tests to determine potassium levels and apply amendments, such as kelp meal, as needed. Adding too much nitrogen, especially late in the season, can prolong vegetative growth, which slows fruit ripening. If daytime heat is affecting the color or appearance of the fruit, consider harvesting early and ripening indoors.

Blossom-End Rot

Another disorder caused by heat stress is blossom-end rot. While tied to inadequate amounts of calcium, blossom-end rot is more associated with a lack of water. The hotter the temperature, the more water is lost to transpiration from the tomato plants. This increase in water loss causes small lesions on the blossom end of the fruit that gradually spread and turn the area into a brownish or tan color. Timely irrigation and maintaining proper pH and calcium levels in the soil can prevent blossom-end rot.

White Core

Variety of beautiful heirloom tomatoes. Photo credit: USDA Lance Cheung.

Internally, tomatoes can develop a hard white core from excessive heat and inadequate fertility. In moderate cases, white core can occur just beneath the flower-shaped leaf, or calyx, on the top of the fruit. In more extreme cases, you may see white core extend through the entire fruit. Having adequate foliage cover and potassium levels can prevent white core. Additionally, older varieties are more susceptible to white core, while newer varieties are less prone to this issue. Therefore, variety selection can again help mitigate this disorder.

Fruit Cracking

Mid- to late-summer tomato harvests often occur during dry periods. However, an afternoon shower can cause the fruit to swell faster than the skin can stretch, resulting in fruit cracking. Fruit cracking can also occur through sudden irrigation during a dry spell. Cracking can be managed by reducing moisture fluctuations, and through the consistent use of drip irrigation. Mulching conserves soil moisture and reduces the risk of temperature swings. If a sudden rain shower is in the forecast after a dry spell, harvesting tomatoes at first blush or the breaker stage (a slight change in color from green to no more than 10% pink, red, orange, or yellow) and ripening indoors will keep the fruit from cracking. Research shows that ripening in a protected structure at temperatures between 55° F and 65° F is equal to ripening on the vine, while ripening at 68° F increases the sweetness and overall flavor of the tomato.

Tomatoes may love the heat, but even they have their limits. By observing your plants closely, using techniques to mitigate heat stress, choosing the right varieties, and managing soil and water strategically, you can protect your crops and enjoy a fruitful harvest. And, while the summer heat may test your patience and your plants, there’s still something magic about harvesting a perfect slicer in the middle of July—enough to make you hum a little of Guy Clark’s tune on your way back from the field.

Read more on tomato production in our ATTRA publication, Organic Tomato Production.

By Audrey Kolde, NCAT Sustainable Agriculture Specialist

My experience in farming started at the hand-tool scale. I enjoy the physical labor, that tangible connection to the land. But years of repetitive movement have started to catch up with me. My love of farming hasn’t changed as the aches and pains have increased—in fact, it has grown. I want to produce even more food to feed my community. I want to grow crops that are calorie- and nutrient-dense, and store well, like beans, winter squash, sweet potatoes, and dent corn—but these require a lot of land. They are cornerstones of the American diet that small-scale gardens often can’t keep up with.

With these crops in mind, my farming partner and I have started the journey to transition part of our land to tractor farming. It is a work in progress. As two women running a farm, we started to think more about why more women aren’t transitioning from small- to mid-scale operations. Women represent 9% of primary farmers in small-scale farms ($100,000-$350,000) and 5% of primary farmers in mid-scale operations ($350,000-$1,000,000). Women have continued farming in small-scale and traditional systems that involve a lot of manual labor and require physical strength. However, mechanization and technology like tractors offer women the chance to broaden their opportunities in agriculture.

Increase Productivity
One major reason to adopt tractor farming is that it makes it possible to cultivate larger areas in less time, with less hired help, and less backbreaking work. Mechanizing tasks like bed shaping, planting, and cultivation is game-changing. Using tractors increases productivity and efficiency, leading to bigger harvests, better quality produce, and access to lucrative markets that require a larger volume of products.

Improve Profitability
Tractors can make it easier for women to grow their businesses and achieve financial independence, helping to close the gender gap in agricultural productivity and land ownership. According to the 2012 Farm Census, female farmers in the United States earn about 40% less than male farmers. As women earn more, they can reinvest in their businesses by buying more equipment, diversifying their crops, or improving how they market their products. This economic freedom allows women to become successful agricultural entrepreneurs.

Improve Farmer Health
One of the biggest benefits of using a tractor for me is that it reduces the need for so much heavy (and expensive, if hired out) manual labor. I am all too aware of the back pain that planting, weeding, and harvesting crops can lead to. By using tractors, women can better manage their health while increasing their farm’s productivity. Tasks you wouldn’t immediately think of, like moving tarps and weights, are much easier with tractors. I once even moved a walk-behind tractor with a riding tractor.

Improve Conservation Practices
As an added bonus, tractors have so many attachments that can help with conservation practices. Proper tilling and cultivation help with pest management. No-till drills and roller crimpers make cover cropping easier. And the world of precision farming methods, like GPS and sensors, save water, use fewer chemicals, and enhance crop yields with less environmental harm.

Barriers
Unlike seed packets and wheel hoes, financing tractors costs more than a pretty penny. Tractors require capital to purchase, rent, or borrow. Women will likely need to find financial help through affordable loans from institutions such as the U.S. Department of Agriculture’s (USDA) Farm Service Agency, Women’s Business Center, or the Small Business Administration, or grants through organizations like USDA Rural Development, National Women’s Business Council, RAFI, and American Farmland Trust’s Brighter Future Fund.

Another barrier is knowledge. Tractor operation is a skill that can be intimidating to learn. Organizations like NCAT and Extension Services are trying to overcome this barrier by training new farmers on how to operate tractors, maintain equipment, and use sustainable practices. Experienced farmers are also an invaluable source of knowledge, and now is the time for those skilled in using tractors to pass their knowledge on to the next generation. The generational transition in farming is coming, and our ability to maintain a steady food supply will require a smooth transition, passing the torch to well-trained hands.

Conclusion
Tractors, used responsibly, can turn more acres into productive, sustainable land, reducing food insecurity and improving the local economy in communities. By overcoming a few barriers, women farmers can improve their profitability and increase their chances of long-term health and success.

ATTRA Resources

Maintaining Your Tractor – Building Your Toolbox

Scaling Up Your Vegetable Farm for Regional Markets

Equipment and Tools for Small-Scale Intensive Crop Production

NCAT Highlights Safety Resources During Farm Safety and Health Week

Other Resources

American Farmland Trust’s Research into Women in Agriculture

The State of Gender Equity in U.S. Agriculture (pdf)

Sources

Dentzman, K. and Lewin, P. (2024), A Fair Comparison: Women’s and Men’s Farms at Seven Scales in the United States. Rural Sociology, 89: 3-39. https://doi.org/10.1111/ruso.12512https://doi.org/10.1111/ruso.12512 

Schmidt, C., Goetz, S. J., & Tian, Z. (2021). Female farmers in the United States: Research needs and policy questions. Food Policy, 102039. https://doi.org/10.1016/j.foodpol.2021.102039